Open Source Tools Support’s reputation | Open Source Tools for Renesas

Open Source Tools Support’s reputation

Open Source Tools Support 636 Rep.

Follow

Open Source Tools Support's reputation

Total 636

0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,10,0,0,10,0,0,0,0,0,0,0

+1

December 13, 2019 Commented Dear Frank, Many thanks for your kind words! We sincerely appreciate them. Looking forward to more good things to come in the near future :-) Happy Holidays! __ The GNU Tools Team

+1

December 13, 2019 Commented Hello, It looks like we ran into a caching issue, which caused the release notes and other pages (including the source code download pages) to not be updated correctly. However, after your report we have reset the cache and now all should show up properly. Thank you for letting us know! __ The GNU Tools Team

+1

December 11, 2019 Commented Hello Mohd, Thanks for your feedback. There's a number of issues here that we would like to address upfront. 1. First, you had provided a Google link. There is no hard link for download, or a specific URL used. Therefore, it's unclear where the download comes from. 2. We do not offer any level of support for building the toolchain other than our own supported environment, which is fully documented on the gcc-renesas.com platform. For that environment, you may find full instructions on how to proceed with the builds by looking at the build toolchain page. __ Thank you, The GNU Tools Team

+1

December 10, 2019 Commented Hello Roger, As you have also opened a support ticket for this same issue, and we are continuing to provide support for this through that private ticket, please let us know if you wish to keep this issue open or if we can mark it as closed. __ Thank you, The GNU Tools Team

+1

December 10, 2019 Commented Hello, The release notes are present in the download page of the toolchain at https://gcc-renesas.com/rl78/rl78-download-toolchains/ (please click the green question mark to the right of every toolchain). We hope this helps, The GNU Tools Team

+1

December 9, 2019 Commented Dear user, Please be informed that our support for building the toolchain is limited to the environment and settings used by us, and which are thoroughly documented in the build procedure you have used. If you use a different environment or build procedure, we are not able to provide any support. __ Thank you, The GNU Tools Team

+1

December 6, 2019 Commented Dear Frank, Thank you so much for your support! We're grateful for your kind comments, it's awesome to see great supporters like yourself reaching out and staying in touch. We wish Happy Holidays to all our users! The GNU Tools Team

+1

November 1, 2019 Commented Hello, Thank you for reaching out to us! Unfortunately, we were unable to reproduce the issue with a basic sample testcase. Could you please send us a sample project in which the issue is reproducible in order to investigate? We encourage you to please open a private support ticket where you could attach the project. __ Best regards, The GNU Tools Team

+1

November 1, 2019 Commented Hi Vikram_FE, we're looking into your issue and will reply as soon as we have an update.

+1

October 14, 2019 Commented You need to please install the toolchain first, then open up a recent version of e2Studio and the toolchain should be automatically detected. Just in case the automatic detection fails, you may also go to e2Studio and click the Help menu, then choose "Add Renesas Toolchains".

+1

September 26, 2019 Commented Hello, Thank you for reaching out to us! Could you please let us know the target device (RX, RL78, ARM) that you need help with? We also suggest to use the e2studio IDE (available for download here: https://www.renesas.com/in/en/products/software-tools/tools/ide/e2studio.html) in order to generate simple sample projects for your device of choosing. We look forward to hearing back from you soon. __ Best regards, The GNU Tools Team

+1

March 23, 2019 Commented Thank you very much for sharing your solution with the rest of the users of our toolchains! We are happy you were able to find the solution eventually. As you may guess, with the various Linux distributions, and their highly different package repositories, it is quite difficult to ensure full compatibility with all such platforms, which is why we always appreciate any feedback from users that can explain how they were able to install the toolchains with no issues. We thank you for that, and hope other users will find this useful as well. Should you have any other questions or concerns, please feel free to let us know at any time. -- Thank you, The GNU Tools Team

+1

March 23, 2019 Commented Hi, Thank you for reaching out! Could you please verify that: a) you have executable permissions enabled for the file? If not, please assign them as follows: $>chmod +x gcc-4.8.4.201803-GNURX-ELF.run b) you are executing the installer as: $>./gcc-4.8.4.201803-GNURX-ELF.run c) do you still get the same error when attempting to run the installer as above? Please let us know and we would be happy to assist the best we can. __ Thank you, The GNU Tools Team

+1

March 18, 2019 Commented Dear customer, One of our technical support representatives has touched base with you at the time of the question. We are going to close this thread therefore, as we are confident the issue had been resolved by now. Should you desire to ask anything else, please feel free to open another issue or create a new support ticket. __ Thank you, The GNU Tools Team

+10

March 8, 2019 Answered Can you please give more details on the Bug-Fixes in your release descriptions?

+1

February 14, 2019 Commented Hello, Please let us know, how are you attempting to execute the installer after assigning it executable rights? Thank you, The GNU Tools Team

+1

February 14, 2019 Commented Thank you @edge30 for the comment. Yes, that's correct, to install the toolchain, please download the ".run" file, change its permissions to include executable rights (e.g. $ chmod +x ) and then execute it directly.

+1

February 1, 2019 Commented Hello, Yes, you are correct, it is -misa=v2. We apologize for any confusion this may have caused. __ Thank you, The GNU Tools Team

+1

January 14, 2019 Commented Hello Thai, Thank you for reaching out to us! To be able to accurately answer your question, please tell us which device are you using? Looking forward to hearing from you, The GNU Tools Team

+1

September 1, 2018 Commented

« Previous 1 2 3 4 5 6 7 8 9 Next »

Support